HB6 is a high rate Li-ion/LiPo balancer, it has a microprocessor to detect and balance each cell voltage of the 2 to 6 cells in series.

LED indicates the balance status of the battery pack, “FLASH” shows the high voltage cell is discharged till the difference of voltage reaches the lowest level. If all LEDS are off, the battery pack is balanced.

user's manual (169K )

HB6 is the Highest efficiency balancer, The balancing current is up to 1A. the unit is only applied to the battery packs with 2AH or above capacity.

Customized output connectors are available

Cooperating with charger, the built-in software can detect the cell voltage in charging. When any cell voltage reaches 4.25v,  it will cut off the charge to prevent the battery overcharged.

Besides independent balance mode, you can connect any LiPo charger to the input lead first, then connect the HB6 to the balance connector on your pack, finally connect the output lead to the discharge lead of the pack.  so your pack is charging at up to 10A and balancing simultaneously.

Feature：

1. Automatically detect and display battery balance status for any 2 to 6 cells pack
2. Imbalances voltage warning and balancing
3. Audio alarm for over voltage
4. Audio alarm for under voltage
5. LED(s) display each cell in balancing
6. Automatically cut-off the charging circuit while any cell is over charged
7. Reversely polarity protection on input, output and balance connector
8. Balance 2 or 3 battery packs simultaneously
9. With Special Connector Conversion Board(CCB) to fit all kinds of battery connectors

2 working mode:

1. Stand-alone balancing
2. Balancing while charge, need to be connected to professional charger.

Input/Output Specifications:

1. Input Voltage/Current: DC 30V, 10 A MAX.
2. Output Voltage:30V MAX.
3. Output Current:10A MAX.

General Specifications:

1. Operating Temperature:           0~40℃
2. Storage Temperature:              -20~85℃
3. Operating Relative Humidity: 5~95%RH

Mechanical Characteristics:

1. Dimension: 126*78*26(mm, L*W*H)
2. DC Input positive leads: 200mm silicon cable with 4mm gold banana plug
3. DC Output negative leads:100mm silicon cable with alligator, JST, TAMIYA, DEANS and so on.
4. Charging negative leads: 300mm silicon cable with 4mm gold banana plug and alligator to battery
5. Balances Connector : JST EHR- 6PIN
6. Case Material : Al alloy
7. weight:260g

Safety Certification: CE

HB6 is fully committed to compliance with the European Union’s RoHS directive.

Related Products:

Chargery Balancer connector  Conversion Board (CCB)

1. The CCB is designed to connect the Chargery Balancer to the different brand LiPo battery packs with different balance connector, include TP, KOKAM, Flightpower, Polyquest, Electrifly etc.
2. The CCB is used to connect the B6 and 2 - 6S lipo battery packs.
3. To use CCB, you can balance 2 LiPo battery packs at the same time, such as two 3S, or three 2S.
4. Size:70*40*8(mm,L*W*T)
5. Weight:10g