CHARGERY website in Chinese Chargery power is a professional manufacturer for top qulity RC power products including chargers,balancers,adapters and balance chargers
Charger & Balancer

LiPo/Li-ion Battery
Normal Battery
Li-ion Battery
LiPo Battery
 
High Rate Battery
15C LiFe Battery
10C LiPo Battery
15C LiPo Battery
20C LiPo Battery
25C LiPo Battery
33C LiPo Battery
40C LiPo Battery
1/10 Car Battery
1/8 Car Battery
Saddle Pack
12C Li-ion Battery
Notebook Battery
Acer series
Asus series
Apples series
Compaq series
Dell series
HP series
Sony series
Toshiba series
Uniwill series
EV Power System
Li-ion system
LiPo system

Accessories
Total Solutions
Specification
Technical Reference

 

 
  home > Products and Solutions > LiPo/Li-ion Battery
 


High rate LiPo battery pack with hard case for 1/10 or 1/8 racing vehicle
Ultra high performance 1/10 and 1/8 scale hard case LiPo battery pack. there are 25C, 30C, and capacity range from 3200-5000mAh avaiable.
Features
  • Battery size is 70*46*(24 ~ 30), (L*W*T, mm)
  • Weight is around 105 ~ 138g
  • Special developed for racing vehicle
  • 100% matched cells for Impendance, capacity and voltage
  • Meets and exceeds ROAR Sanctioning requirements
  • Embedded standard 4mm Gold connectors
  • 5.0 mOhm typical at the terminals!
  • Simple connection with Chargery chargers
  • Maintains 3.7V+ flat platform discharge performance under typical racing loads, for consistent power and precise control.
  • Replace with NIMH battery pack, without need for deep discharge cycling
  • 2C fast charge (with CY-0410B recommended)
  • Typical race consumes just 25-35% of capacity
  • Extremely slow self-discharge
  • Special balance charge extension wire connecting 2pcs saddle pack.
 

  • CPS3300-1S2P, 3.7V 3300mAH, 25C continuously discharge, 50C burst
  • Embedded standard 4mm Gold connectors
  • 70*46*24 (L*W*T, mm)
  • Around 105g
  • CPS4950-1S3P, 3.7V 4950mAH, 25C continuously discharge, 50C burst
  • Embedded standard 4mm Gold connectors
  • 70*46*30 (L*W*T, mm)
  • Around 135g
 
  • CPL3200-1S2P, 3.7V 3200mAH, 30C continuously discharge, 60C burst
  • Embedded standard 4mm Gold connectors
  • 70*46*24 (L*W*T, mm)
  • Around 107g
  • CPL4800-1S3P, 3.7V 4800mAH, 30C continuously discharge, 60C burst
  • Embedded standard 4mm Gold connectors
  • 70*46*30 (L*W*T, mm)
  • Around 138g

 

   
Model
Rated capacity
Voltage
Dimensions(mm)
Weight
Discharge rate
Charger Model
(mAH)
(V)
Thickness
Width
Length
(g)
Continuous
Burst
CPE4800-1S3P
4800
3.7
20
47
93
150
35C
70C
 
CPL3200-1S2P
3200
3.7
24.5
46.5
70.0
107
30C
60C
CPL4800-1S3P
4800
3.7
30.0
46.5
70.0
138
30C
60C
CPS3300-1S2P
3300
3.7
24.5
46.5
70.0
105
25C
50C
CPS4950-1S3P
4950
3.7
30
46.5
70.0
135
25C
50C
                   
 

 

Ö÷Ò³

Chargery Power Co.,Ltd. Copyright ©2023, All rights reserved. welcome to www.chargery.com